BITUMEN SECTION
INTRODUCTIONS
Asphalt, also known as bitumen is a sticky, black, highly viscous liquid or semi-solid form of petroleum.
- 15/90
- 30/40
- 40/60
- 60/70
- 60/80
- 60/90
- 70/100
- 80/100
- 85/100
- CRS1
- CRS2
- MC250
- MC30
- MC3000
- SC250
- SC3000
- SC70
- SC800
- VG10
- VG20
- VG30
- VG40
- 10/20
- 40/50
- 20/30
- 50/60
- 50/70
- 30/45
- 35/50
- 100/150
- 120/150
- 160/220
- 250/330
- MC70
- MC800
15/90
It is bitumen that is aerated by mixing two raw materials, vacuum baton and vacuum slab in bitumen production reactors under our special pressure and temperature between 200 to 300 degrees Celsius to combine the hydrogen atoms in the bitumen molecules with air oxygen and create Polymerization reactions yield heavier hydrocarbons that have a lower degree of penetration and a softer point than the original pure bitumen. This type of bitumen has a softness of 90 and a permeability of 15.
30/40
Bitumen 30-40 is bitumen that is obtained by performing an aeration process on vacuum baton (raw material for bitumen production which is taken from the bottom of the distillation tower in the vacuum of oil refineries) in bitumen production units and the degree of permeability (determination The hardness of bitumen) is between 30 and 40.
40/60
Bitumen 40-60 bitumen which is obtained by performing an aeration process on vacuum baton (raw material for bitumen production which is taken from the bottom of the distillation tower in the vacuum of oil refineries) in bitumen production units The hardness of bitumen) is between 40 and 60.
60/70
Road bitumens are classified based on the results of penetration degree and soft spot tests. The classification is based only on the penetration range, for example, bitumen 60-70 has a penetration degree between 70 and 60 and a softening point between 48 and 52 oC. The main part of penetrating bitumens 60-70 bitumen which is used in road construction.
60/80
The condition of refinery bitumen depends on its temperature. The relationship between temperature and hardness of different types of bitumen depends on the type of crude oil and its polishing method and the degree of permeability of bitumen 60-80 between 6 to 8 mm. Is the road. Are. Used for asphalt production and mainly used in hot asphalt production for surface coating. It is mostly used in various types of bitumen and is a necessary material for other bitumen products.
60/90
The condition of refinery bitumen depends on its temperature. The relationship between temperature and hardness of different types of bitumen depends on the type of crude oil and its polishing method and the degree of permeability of bitumen 60-90 between 6 to 9 mm. Is the road. Are. Used for asphalt production and mainly used in hot asphalt production for surface coating. It is mostly used in various types of bitumen and is a necessary material for other bitumen products.
70/100
The penetration bitumen 70-100 produced in this unit, which has 70-100 bitumen and its softness is 43 to 51, it is selected according to the needs of the project.
80/100
a standard bitumen of penetration type, which is commonly known as road grade bitumen and has extraordinary properties for road construction and asphalt and road surface. This type of bitumen is mainly used in making hot asphalt mixtures. Penetration grade bitumens such as 80-100 bitumen are bitumens that are obtained by performing an aeration process on the bottom of the distillation tower, known as vacuum baton so that its degree of permeability is between 80 and 100. Infiltration grade bitumens have thermoplastic properties, this property causes the viscosity of bitumen to decrease at high temperatures and its viscosity to increase at low temperatures. Meanwhile, 80-100 bitumen is most used in the preparation of the road surfaces.
85/100
One of the products of KARSAN HATRA OIL Company is bitumen with a degree of penetration (bitumen hardness) of 85-100. bitumen which is obtained by performing aeration process on vacuum baton (raw material of bitumen production which is taken from the residue of distillation tower in the vacuum of oil refineries) in bitumen production units. The most common use of bitumen is in road construction, insulation, construction, and also the production of liquid bitumen. This product is more suitable for cold regions of the country in terms of place of use.
CRS1
Bitumen emulsion CRS1 is a cation breaker emulsion. Bitumen (emulsion bitumen) is obtained by mixing bitumen and water and an emulsifier. The amount of emulsifier is very small and is about 0.3 to 0.5% by weight of bitumen.
CRS2
Bitumen CRS2 emulsion is a cation breaker emulsion. Bitumen (emulsion bitumen) is obtained by mixing bitumen and water and an emulsifier.
MC250
MC-250 bitumen is a retarding solution that contains 74% bitumen. This bitumen is black and is produced under the ASTM D 2027M-13 standard.
MC30
Liquid bitumen refers to bitumen that is the result of mixing bitumen with a lubricant (hydrocarbon or water). Ordinary and pure bitumens, such as 60-70 bitumens, are solid in ambient conditions and temperatures, and in order to use them, they must be heated to become liquid, but in many cases, it is not possible to use heat, or it is not economical, or heat. Causes decomposition of bitumen (burning bitumen) and it is not possible to use it cold. In these cases, liquid bitumen is used.
MC3000
MC-3000 bitumen is a retarding solution that contains 85% bitumen. This bitumen is black and is produced under the ASTM D 2027M-13 standard.
SC250
SC-250 bitumen is a retarding solution that contains 60% bitumen. This bitumen is black and is produced under ASTM D 2026M-15 standard.
SC3000
SC-3000 bitumen is a retarding solution that contains 80% bitumen. This bitumen is black and is produced under ASTM D 2026M-15 standard.
SC7
SC-70 bitumen is a retarding solution that contains 50% bitumen. This bitumen is black and is produced under ASTM D 2026M-15 standard.
SC8000
SC-800 bitumen is a retarding solution that contains 70% bitumen. This bitumen is black and is produced under ASTM D 2026M-15 standard.
VG10
VG-10 bitumen is a type of refining bitumen. According to zinc testers (or viscosity), it means: the penetration of a standard needle with a certain shape in millimeters under the effect of a load of 100 grams in 5 seconds in bitumen Which takes place at a temperature of 25 ° C. The obtained number indicates the permeability of bitumen
VG20
VG-20 viscosity bitumen is a class of refined bitumens obtained from vacuum aeration of the distillation tower and divided according to their viscosity (expensive). This type of bitumen is mostly used in road construction, insulation, construction, and also the production of liquid bitumen.
VG30
Bitumen VG-30 Viscosity bitumen is a standard bitumen that is especially used as paving bitumen and is suitable for road construction and asphalt production with special properties. VG-30 grade bitumen is used for roads with high traffic and heavy vehicles.
VG40
Bitumen VG-40 is a grade of refined bitumen that is obtained by vacuum aeration of the distillation tower and is divided based on its viscosity. VG40 bitumen is used in areas under high pressure such as intersections, near tolls, and truck parking instead of old bitumen with a permeability of 40.30. Due to the high viscosity of this type of bitumen, hard bitumen can be produced to improve tensile strength and other problems related to higher temperatures and heavy traffic loads.
10/20
Bitumen 10-20 is bitumen that is obtained by performing an aeration process on vacuum baton (raw material for bitumen production, which is taken from the bottom of the distillation tower in the vacuum of oil refineries) in bitumen production units and the degree of permeability (determination The hardness of bitumen) is between 10 and 20. The main common applications of this product are in the tropics and insulation and sound and shock absorption.
40/50
Bitumen 40-50 is which is obtained by performing aeration process on vacuum baton (raw material of bitumen production which is taken from the bottom of distillation tower in the vacuum of oil refineries) in bitumen production units so that its permeability is between 40 Up to 50. Used in road construction industries for tropical areas, insulation and also the production of liquid bitumen is one of the applications of this type of bitumen.
20/30
Bitumen 20-30 which is obtained by performing aeration process on vacuum baton (raw material of bitumen production which is taken from the bottom of distillation tower in vacuum of oil refineries) in bitumen production units and degree of permeability (determination of stiffness) Bitumen) it should be between 20 and 30.
50/60
Bitumen is 60-50 bitumen which is done by aeration process on vacuum baton (raw material of bitumen production which is taken from the bottom of distillation tower in the vacuum of oil refineries).
50/70
Bitumen is 50-70 bitumen which is done by aeration process on vacuum baton (raw material of bitumen production which is taken from the bottom of distillation tower in the vacuum of oil refineries).
30/45
Bitumen 30-45, penetration 30 to 45 produced in this unit, which has a penetration of 30 to 45 bitumen and its softness is 52 to 60, is selected according to the needs of the project. Bitumen is a derivative of oil produced in an oil refinery. Bitumen is a substance that dissolves in carbon sulfide and carbon tetrachloride and is solid when exposed to ambient temperature. According to the needs of the project, by raising its temperature, it changes from a solid-state to a smooth paste state.
35/50
Bitumen 35-50 is bitumen that is obtained by performing aeration process on vacuum baton (raw material of bitumen production which is taken from the bottom of distillation tower in the vacuum of oil refineries) in bitumen production units and degree of permeability The hardness of bitumen) is between 35 and 50.
100/150
Bitumen 100-150, The penetration bitumen is 80 to 100 produced in this unit, which has a penetration of 150-100 and its softness is 39 to 47, is selected according to the needs of the project.
120/150
bitumen 120-150, which is obtained by performing the aeration process on vacuum baton (raw material for bitumen production, which is taken from the bottom of the distillation tower in the vacuum of oil refineries) in bitumen production units and the degree of permeability (determination of stiffness). Bitumen) it should be between 120 and 150. The main common use of this product is in very cold and icy areas.
160/220
bitumen 160-220 obtained by performing aeration process on vacuum baton (raw material for bitumen production taken from the bottom of distillation tower in the vacuum of oil refineries) in bitumen production units and degree of permeability (determination of stiffness) Bitumen) it should be between 220 and 160.
250/330
Bitumen 250-330 is obtained by performing aeration process on vacuum baton (raw material of bitumen production which is taken from the bottom of distillation tower in the vacuum of oil refineries) in bitumen production units and degree of permeability (determination The hardness of bitumen) is between 250 and 230.
MC70
Bitumen MC-70 is a retarding solution that contains 64% bitumen. This bitumen is black and is produced under the ASTM D 2027M-13 standard.
MC800
Bitumen MC-800 is a retarding solution that contains 80% bitumen. This bitumen is black and is produced under the ASTM D 2027M-13 standard.
